How to Set Up Your Bissell ProHeat 2X Revolution Pet Carpet Cleaner

Getting your new Bissell ProHeat 2X Revolution Pet Turbo Upright Carpet Cleaner ready for use can seem daunting, but with the right guidance, you’ll be cleaning your carpets professionally in no time. Proper setup ensures optimal performance, safety, and longevity of your machine. This guide walks you through each step, from unpacking to first use, with practical tips for troubleshooting common issues.

Before you begin, gather all included accessories and recommended products to streamline the process and achieve the best cleaning results. Always follow safety precautions and manufacturer instructions to protect yourself and your home.

Key Takeaways

BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet Cleaner, 35799

• Motor Technology: 40% more suction, quieter operation
• Max Clean Mode: Removes dirt, stains, allergens
• Express Clean Mode: Dries carpets in 30 minutes

View Latest Price

As an affiliate, we earn on qualifying purchases.

Unboxing and Initial Inspection

1. Carefully remove the Bissell ProHeat 2X Revolution Pet from its box. Verify that all components are present: the main cleaner unit, hoses, attachments, and user manual.
2. Inspect parts for any damage during transit. Ensure the brushes, filters, and cords are intact.
3. Read the user manual thoroughly to familiarize yourself with the machine’s features and safety precautions.

Assembling Your Carpet Cleaner

1. Attach the clean water tank to the back of the machine, ensuring it clicks securely into place.
2. Insert the dirty water tank into the designated compartment, making sure it’s properly seated.
3. Install the dual DirtLifter PowerBrushes by aligning them with the brush roll area and ensuring they snap into place.
4. Connect the power cord to a grounded outlet, and check that all attachments are correctly assembled if you plan to use tools like accessories or brushes.

Preparing for Your First Clean

Fill the clean water tank with hot tap water, ideally around 120°F, to optimize cleaning performance. Add the recommended cleaning solution, such as Bissell Multi-Surface Solution or the Deep Clean Pro formula, following the manufacturer’s instructions.

Always use the appropriate amount of solution; overfilling can cause excessive foam, while under-filling may reduce cleaning effectiveness.

Prime the machine by turning it on and briefly running it without a load to ensure everything is functioning correctly and the brushes are rotating smoothly.

Operation and Troubleshooting Tips

• Start with the MAX Clean mode for heavily soiled areas, and switch to EXPRESS for routine cleaning to speed up drying times.
• Keep the nozzle close to the carpet surface but avoid pressing too hard, which can damage the brushes or reduce suction.
• If you notice reduced suction or brushes not rotating, turn off the machine, unplug it, and check for blockages or debris in the brush area and hoses.
• Ensure the heatwave technology is functioning by using hot water and avoiding cold conditions that can affect water temperature maintenance.

Cleaning and Maintenance After Use

After cleaning, empty the dirty water tank, rinse it thoroughly, and remove any debris from the brushes and filters. Clean the solution tank and refill with clean water to flush out residue.

Check the brushes for hair or fibers that might cause tangling, and replace filters as needed—consider the JORAIR Brush Replacement for optimal performance.

Store the machine in a dry, cool place, and ensure all attachments are clean and dry before storage.